Once your window is in the correct position, press firmly throughout the surface
of the window with a lot of pressure to make sure the silicon is really working.
Now you need to KEEP pressure on the window so it does not raise up, so we
just used anything we could to keep it weighted down. This looks very ghetto
but it works! Leave this weight on the panel for atleast 24 hours before removing
the weight to make sure the silicon is dry.
After the 24 hour time period has passed, place that piece of fine craftsmanship
onto your case and take that case to every lan you can! Be proud of it-most
people don't even have the guts to do it, so no matter how good or bad it
looks- it will be looked at!
